OTA Modulated Signal Phased Array Antenna Test
VNA Active Device Characterization Essentials Webinar Series
RF Microwave Antenna
Learn VNA Characterization Essentials
To meet the demand for greater data rates, 5G communications systems are migrating to mm-Wave frequencies where greater spectrum is available. However, there are several challenges associated with the adoption of mm-Wave, like increased path loss and decreased power amplifier peak output power relative to their sub-10 GHz counterparts. Phased arrays are a widely adopted solution, combining tens or hundreds of elements to achieve highly effective isotropic radiated power (EIRP). Unfortunately, characterizing the over-the air (OTA) performance of phased arrays under modulated signals is particularly challenging as it requires high dynamic range instrumentation and careful calibration. 

In part 4 of the VNA Active Device Characterization Essentials webinar series, you will learn how to simplify and accelerate the phased array testing and linearization using the VXG signal generator, PNA-X network analyzer, and modulation distortion analysis software application. 

View other webinars in the series:
Original Webinar Date: September 13, 2022
Time: On-demand
Duration: 1 hour

By clicking “Submit” you are providing Keysight with your personal data.

For information on how we use this data, see the Keysight Privacy Statement link at the bottom of this page.

Gabrielle Duncan - Keysight
Gabrielle Duncan
Product Manager
Keysight Technologies
Nizar Messaoudi - Keysight
Nizar Messaoudi
PNA Product Manager
Keysight Technologies

Learn more about our commitment to privacy:  Keysight Privacy Statement
©   Keysight Technologies